| Lounge | 21' x 12' | 6.45m x 3.65m |
| Kitchen | 10' x 11' | 3.0m x 3.2m |
| Bedroom 1 | 11' x 13' | 3.3m x 3.9m |
| Bedroom 2 | 11' x 13' | 3.3m x 3.9m |
| Bedroom 3 | 8' x 9' | 2.25m x 2.65m |
| Bathroom | 10' x 6' | 2.9m x 1.75m |
| Conservatory | 10' x 10' | 3.0m x 3.0m |
| Garage | 21' x 12' | 6.5m x 3.65m |
For further information about any house types or to discuss a custom build call 01559 371 501 or email Contact
Timber Frame Kit Specification together with the following:-
| Foundations | Dig foundations, concrete fill, 300mm blockwork and lay concrete slab (standard 1 metre deep foundations) |
| Kit | Erected |
| External | 100mm blockwork with roughcast render and smooth rendered plinth. Alternatives such as facebrick or stone can be quoted for as extra |
| Roofwork | Overfascia vents with either Marley Modern roof tiles or fibre cement slate with ridges |
| Internal | 150mm insulation to external and 100mm insulation to all internal walls with 250mm insulation to attic space. 12.5mm plasterboard to ceilings and walls |
| Plaster | All rooms with Thistle finish and 125mm coving where appropriate |
| Electrics | All electrical work to NHBC minimum requirements |
| Plumbing | Plumbing to bathrooms and kitchen with full oil central heating from an oil combi-boiler |
| Kitchen Units & Bathrooms | A PC sum can be allocated for kitchen units and bathroom sanitary ware as required |
| Chimneys & Fireplaces | To client requirements at extra cost e.g. brick or stone faced with hardwood surround |
| Tiling | Walls, floors all charged at £20 per square metre (adhesive included) |
Paths, driveways, drains, soakaways, boundary fences, gates and posts are not included in specification. However, these can be priced after inspection of site.
Service connections i.e. water, electricity, sewerage, are not included in specification.
Supply and erect:-
| Soleplates and DPC | 38mm x 140mm CLS PRESSURE IMPREGNATED complete with galvanized fixing straps |
| External Wall Panels | 38mm x 140mm CLS studs at 600mm centres with 210mm lintels over preformed openings. Frame clad with 9.5mm OSB3 exterior sheathing with breather membrane |
| Internal Walls | 38mm x 90mm CLS studs at 600 centres with preformed door openings. Only load bearing walls erected, non load bearing partitions supplied only |
| Cavity Barriers | 45mm x 40mm treated timber to be fixed according to Building Regulation requirements |
| Joists (where applicable) | Sawn, gauged and tanalized at 400 centres to first floor |
| Roof Structure | Roof trusses at 600 centres with all relevant wind bracing |
| Gable Ladders | Prefabricated in treated timber to match trusses |
| Fascias, Bargeboards and Soffits | 175mm white uPVC fascia. 300mm uPVC Tongue and Groove Soffit |
| Windows and Doors | White uPVC doors, double glazed windows with Pilkington 'K' glass |
| Felt and Battens | 25mm x 50mm sawn softwood treated battens with standard felt |
| Garage Door (where applicable) | Up and over galvanized steel or 'Hormann' sectional doors |
| Delivery | A nominal charge will be made if the distance from our workshop in Newcastle Emlyn to your site is more than 15 miles |
Scaffolding to be supplied by client
Design and Planning Services are available, for more information please contact us.
All dimensions are approximate
Cartrefi Ffosaron Homes Ltd, Bwlch-y-Domen Isaf, Pantybwlch, Newcastle Emlyn, Carmarthenshire, West Wales, SA38 9JF
